DW630W-IP 63" Long Reach OverBed Ipad Pro Tablet Wall Arm Holder
DW630W-IP 63" Ipad Pro Tablet Long Wall Arm - Over the Bed or Dental Chair Arm Long Reach Tablet Arm
Holds weights from 6 - 11 lbs.
The tablet can face down, towards the headboard, to any side and even totally forward.
Reg. Price: $593.00
* Limited Time Introductory Sale Price: $543.00
+ $65.00 Shipping (Ground contiguous U.S. - Please call for faster options).
This item is the same as our DW630W-1218 63" Wall Monitor Arm, but custom made to hold an Ipad Pro or other light weight devices in the 6 - 11 lbs weight range. The gas springs have been designed to meet the tablet's and tablet holder's reduced weight so the device stays put at the desired position.
This new extra-long gas-assisted Ipad Pro wall arm is normally installed on a wall for use in bed at hospitals, assisted living facilities, dental practices, and many homes. It is also used in sitting or standing position where a wall arm is required.
The long wall arm allows to set the tablet in any position or move it out of the way when not in use. Also can be used as a forward-facing extra long Ipad Pro Tablet wall arm.
Click on the video below to see its range of motion. The video below shows the version of this arm for monitors (Item DW630-1218), but the range of motions are the same:
Scroll all the way down to see another video clip.
With this new gas assisted long reach Ipad tablet arm you can easily browse the Internet and view your Ipad Pro in bed or on a medical chair. Position the arm's tablet holder over the bed to your desired position, and it will stay there.
- Screen Viewing is totally adjustable: the tablet holder swivels and tilts so the screen can face parallel to the bed, or towards the headboard or any wall and even forward.
- Tilts all the way in the opposite direction, without the handle attached: (180 degrees total; 45 with handle)
- Swivels 180 degrees side to side without the handle and 60 with the handle.
- Rotates 360 degrees
- Cables run hidden along arm sections, covered by an easily removable cable conduit (see Page 2; Step 5 of Instruction Sheet link below).
- Cable conduit internal dimensions: 23 H x 26 W mm; 0.9 H x 1.02 W inches
a) Ipad Pro. Other devices can be retro-fit as long as the weight of the attached unit is between the 6 - 11 lb range.
Note: contact us with any questions before purchasing.
D-REF Installation Reinforcement Plate: to ensure a sturdier installation, especially on hollow walls or non-concrete walls, we recommend the D-REF Installation Reinforcement Plate (see PDF). This increases the footprint of the arm's base and, most importantly, adds 15 extra holes so you can "catch" the stud in the middle of the stud and the base. It also adds more fastening points on the sides to reinforce installation. Click here to buy.
Note for Hollow-Wall installation:
The fasteners provided are for wood or concrete only. We do not include fasteners for hollow-walls, since they must be specific to the quality and thickness of your particular hollow-wall. We recommend metal anchors for at least 50 lbs each, to compensate for the down-force (torque) applied on the base of the arm when it is fully extended, horizontal to the floor. Consult a professional installer in case of doubt. The above D-REF plate aids in securing installation. An example of hollow-wall anchors can be seen here but the anchor used will depend on your type of hollow wall. Always tray to catch the stud with at least 2 bolts or reinforce the wall because the anchor will surely not break, the wall might.
Try multiple viewing angles, with positioning possibilities greatly facilitated by the double-spring articulated LCD monitor wall arm, which extends all the way to a straight 63" (horizontal to the floor). Then, when not in use, fully push it back against the wall.
The torque of the movements can be adjusted, to suit individual applications.
Here you van see an image provided from a client. In this case he purchased the version for monitors instead of Ipad Pro.
This hospital LCD wall arm has a great range of motion.
Below is a short video clip that shows two DW630-1218 arms, one on each side of the bed:
Clients who bought the above item also purchased these items:
DP170 17.5" Long LCD Monitor Pole Arm Mount Bracket
DMED1 Sit-Stand Mobile Medical Computer Cart w/lockable Laptop Drawer & LCD Mount
S40LC 40" Wide Mobile Computer Desk with Hutch Printer Shelf - Light Cherry