DFL17CL-LCD2 Dual Monitor Desk Mount Stand Heavy Duty Adjustable - Clamp On Desk
DF17CL-LCD2 Offset Dual Monitor Desk Mount Stand Heavy Duty Adjustable - Clamp On Desk
For monitors up to 27" (Actual width)
* Reg. Price: $149.00
* Limited Time Sale Price: $119.00! + $19.00 Shipping (contiguous U.S.)
The DF17CL-LCD2 offers a great solution to set us a dual LCD monitor stand on your desk or table in minutes by quickly clamping this offset dual monitor stand on the table's edge. In addition, the articulating arms are great to find the best facing angle for your monitors. You can pull them out up to 17" from the pole and then push them back towards the pole or just swing them out of the way.
Both arms can face anywhere. The arms can also can swing 360 degrees around the pole and they are also height adjustable. So, both can face in one direction, or one to each side or one front and the other to the opposite side.
The brackets also tilt and swivel 90 degrees to each side. For instance, if you have a touchscreen monitor, you can make the monitor face tilted upwards and use the screen in stand up mode. The arm is also height adjustable all along the pole.
Click on the thumbnails for larger images.
- Pole Height: 17 3/4"
- Pole Diameter: 1 3/8" (35 mm.)
- Clamp opens up to 3"
- Monitor Bracket: VESA 75 & 100 mm patterns
- Arm length: 17" from edge of pole to center of bracket
- Height Offset between monitors: 2.5"
* What Fits?
Monitors up to 25 lbs. e.a. If you want them to face in the same direction, side by side, the actual width of each monitor (no the diagonal width) should not exceed 27". These monitors generally come with a VESA mounting hole pattern of 100 x 100 or 75 x 75 mm. If you have a different hole pattern or monitor size, just contact us before buying.
- Articulated Arms extend from 4.5" to 17"
- Height is easily adjusted along the pole via a handle
- Monitor tilts, swivels, rotates AND turns all around the pole, facing anywhere.
- LCD bracket swivel: 270 degrees; total tilt: 220 degrees
- With cable management clips
- For monitors up to 23 lbs.
- Torque adjustable on all articulations
Great monitor viewing possibilities:
Also Wall mountable: due to its solid 2-piece clamp, by just affixing the rear vertical part of the clamp to a wall you can use this arm as a wall mounted monitor arm.
Comes with unique Heavy-duty dual bolt clamp: instead of using just one flimsy plastic-knob screw like most budget priced items in the market, this unit uses 2 all metal bolts to better distribute the pressure on the clamp's base, with no risk of plastic knob breaking off.
* Tip: when attached to a wall, since you can also adjust the height of the arm along the pole, if you add a chair and a wall-mounted keyboard arm, you can use this set-up as a wall-mounted computer-desk.
* Monitor can be set 100% horizontal, aiming to the ceiling or to the floor:
DMED1 Sit-Stand Mobile Medical Computer Cart w/lockable Laptop Drawer & LCD Mount